Want to buy Meade AC adapter for ETX 70/80/90/125 & LS 6? Order today!

Meade AC adapter for ETX & LS 6
Use the Meade AC adapter for ETX & LS 6 to connect your Meade to the mains. The inverter converts standard 220 volt AC current to 12 volt DC current. This European AC adapter supports the ETX 70/80/90/125 and the ETX-LS 6" and all Meade DS telescopes.

Note: product comes with an European plug

Most helpful review See the most helpful reviews

MEADE AC ADAPTER FOR ETX 70/80/90/125 & LS 6

Matt, Waterford | Friday July 22 2011 at 11:33 PM | Usefulness: 32 out of 52 | a quarter of a year in possession

This product is great for use at home and in a field (with a power tank) as the multi adaptors allow lots of power choices. For anyone who is fed up buying batteries you need this.

Pros

Power from house.
Power in the field (with power tank).
Power from the car.
adapters for each option provided.

Cons

A little expensive but not as expensive as buying batteries.

Has this review helped you? Yes No

Question: Sabri Zain, 16 September 2011 Not a question, but just a report back - I received my order today. The good news is that it works perfectly on UK mains supply, with a traveller adapter. The even better news - other than the Pros listed above, running your ETX80 on mains really, really improves slew performance, speed and accuracy. I don't care what Meade says but batteries - no matter how fresh or high quality they are - just can't cope with the scope's motor. You can really tell the difference when it's own AC. Answer: that is good to know

Question: Anonymous, 13 September 2011 Would the power supply work here in the UK if I used it with an adapter for Dutch plugs? Answer: Yes this would not be a problem.

Question: brian stuck, 14 May 2011 you have advised that the etx80 power supply would not be suitable and you list a celestron one but this is also 12volt.Is this really suitable? thank you b stuck Answer: The Celestron power adapter is not suitable for Meade ETX telescopes.

Question: brian stuck, 14 May 2011 you list a power supply for the etx 80 as 12 volt but i have been dvised that this should be for 9volt as mine runs off 6 x 1.5volt batteries, please advise. I also need the 506 lead and software for viewing via my laptop. many thanks Brian Stuck. Answer: Dear Mr. Stuck,

I am afraid the power adapter we have available for the Meade ETX80 has a European plug, not a British one. It is possible to use a 12 volt adapter with theETX80 though.

We do have the 506 cable plus associated software available for you. Please follow the following link:

www.telescopeplanet.co.uk/meade-506-astrofinder-software-cable-connector-kit-for-etx70

Question: brian stuck, 1 May 2011 My etx80AT-TC,( purchased 2007), refers to an input voltage of 9volts. Would the adapter you sell be suitable for battery replacement. With many thanks, B Stuck Answer: This adapter would not be suitable because it is made for the dutch market. You can use the following adapter also on your meade ETX 80: www.telescopeplanet.co.uk/uk-ac-adapter-for-celestron

General
	Type	Power adapter
	Brand	Meade
	Series	Meade ETX Meade DS 2000 Meade LX Meade LXD
	Guarantee	1 year
	Suitable for	Meade LX90 Meade ETX-70 Meade ETX-80 Meade ETX-90 Meade ETX-125 Meade LXD-75 Meade DS 2000 Meade ETX-105 Meade ETX LS 6 inch Meade ETX LS 8 inch Meade ETX LT 6 inch
	Adapter fitting	socket
	Output voltage	12V

Please ask your question here
Your name	Email address (optional)
*Optional. Your name is displayed with your question	*Your email address will only be used to alert you when your question has been answered.